Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 146)

Publication 1757-UM006A-EN-P - May 2002
4-60 Configurating the 1757-FIM
7. Click OK.
The load is initiated, shown by the Load window.
8. After the load is complete, click the Monitoring tab.
9. Verify that the Link is activated.
10. Repeat Steps 1 to 9 to load another Link or device.
Summary The Control Builder for the R400 ProcessLogix system lets you add
and configure fieldbus components as a natural and intuitive
extension to the existing ProcessLogix components. This promotes a
seamless integration of the fieldbus functions with existing
ProcessLogix capabilities.
TIP
If errors are detected, they will be listed and you will
prompted to select whether or not you want to
continue the load with errors. It is a good idea to
note the errors and abort the load (close), so you can
go back and correct the errors before completing the
load.