Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 188)

Publication 1757-UM006A-EN-P - May 2002
A-8 Standard Function Block Parameters
Table A.20 CLR_FSAFE
Table A.21 CONFIRM_TIME
Table A.22 CONTROL_OPTS
Usage C/Channel
Length 2
Valid Views VIEW_4
Storage Static
Remarks The initial value is 0.
Classification Simple Variable
Description Serves as a switch to reset/clear the device failsafe state after the fault con-
dition is cleared.
FF Data Type Unsigned 8
Range 1: Off
2: Clear
Usage C/Contained
Length 1
Storage Dynamic
Remarks The operator can control PROGRAM or LOCAL access to these values.
Classification Simple Variable
Description Defines the time between retries of alert reports.
FF Data Type Unsigned 32
Range Positive
Usage C/Contained
Length 4
Valid Views VIEW_2
Storage Static
Remarks The initial value is 32000 milliseconds.
Classification Simple Variable
Description Represents bit string for control options to alter the calculations done in an
applicable function block.
FF Data Type Bit String
Usage C/Contained
Length 2