Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 132)

Publication 1757-UM006A-EN-P - May 2002
4-46 Configurating the 1757-FIM
11. In the SP field, enter 50.
12. Click OK to close the window and save the configuration.
Configuring AO block for sample loop
1. In the CM101 chart, double-click the AO function block.
The AO Block Parameters window opens.
2. In the Name field, enter AO_FLOW.
3. In the Description field, enter Flow Control Output.
4. Click OK to close the window and save the configuration.
TIP
This is a function block that was loaded using the
Fieldbus Library Manager and the DD from the
Flowserve Actuator.