Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 149)

Publication 1757-UM006A-EN-P - May 2002
Operating the 1757-FIM 5-3
1. In the Monitoring tab, click the LINK icon.
2. Click Toggle State in the toolbar.
The Change State window opens.
3. Click Yes.
This initiates the state change. The icon changes from green to
blue. The FIM is only inactivated when both Links are
inactivated (shown below).
TIP
You can initiate this same function through the
corresponding Detail display in Station.