Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 136)

Publication 1757-UM006A-EN-P - May 2002
4-50 Configurating the 1757-FIM
8. Click the IN pin on the FTRIGA block. Double-click the area
adjacent to the pin.
The parameters connection box appears.
9. Repeat the previous steps to select DATAACQ_101.PVLOALM.FL
as the parameter name.
10. Close the Point Selector dialog box.
See Figure 4.5 for the completed CM102 with parameter
connections.
Figure 4.5 Completed CM102 with parameter connections for sample loop
interlocks.