Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 129)

Publication 1757-UM006A-EN-P - May 2002
Configurating the 1757-FIM 4-43
9. Select PVLLALM.FL in the Parameters list.
10. Verify that the Pin Position is Output and Top/Bottom.
11. Click Add.
PVLLALM.FL is added to the Output-Bottom list.
12. Select PVLOALM.FL in the Parameters list.
13. Verify that the Pin Position is Output and Top/Bottom.
14. Click Add.
PVLOALM.FL is added to the Output -Bottom list.
15. Select PV in the Output-Bottom list.
16. Click Remove.
PV is removed from the Output-Bottom box.
17. Select PV in the Parameters list.
18. Select Left/Right in the Pin/Position box.