Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 284)

Publication 1757-UM006A-EN-P May 2002
F-36 1788-CN2FF Installation Example
When the transmitter has been configured and the Monitor window is
displaying process variables properly, you have completed the
configuration. Congratulations!
Sending Data To the PLC-5,
CLX, PLX or SLC The following steps illustrate the sequence in which data will be sent
from the Linking Device over ControlNet.
1. Double click on the “Device Info” icon.
A new screen displays all the data produced by the attached Fieldbus
Devices by Function Block Tag name.