Modes of operation system operation 7-38 – Bio-Rad BioLogic Signal Import Module (SIM) User Manual
Page 167
7.5
POST RUN Screen
The Post Run screen enables peak annotation (“tagging”) and data export. To enter the Post Run screen,
open a run file in the Browser screen, or when a run is finished choose PostRun from the toolbar. Two
chromatograms are viewed: the main chromatogram in the lower large window and the reference
chromatogram in the upper right window. In the upper reference chromatogram, use the vertical scrollbar to
adjust the scale.
Figure 7-11a. Post Run Screen showing a Volume-based Chromatogram
and "Rack and Tube#" fraction numbering
Tags
AU
SA
FullView Print
Del Tag
Activity
Edit
View
Utilities
Options
Edit
Method
New
Method
New
Run
Manual
Setup
Values at Cursor
Current Tagging Trace:
QuadTec-3 (214 nm)
Run Time:
Gradient:
QuadTec-1 (280 nm):
QuadTec-2 (260 nm):
QuadTec-3 (214 nm):
QuadTec-4 (405 nm):
Conductivity:
GP pressure:
No Trace:
00:03:38.4
21% Buffer B
0.0345 AU
0.0228 AU
0.4762 AU
0.0021 AU
8.47 mS/cm
375.53 psi
Protocol
wash
load
1
2
Run
Notes
Report
PostRun
Settings
Log
Help
File
Browser
50
100% Buffer B
QuadTec-3 (214 nm)
AU
GP pressure
50.0
0.0
-10.0
40.0
30.0
20.0
10.0
Fractions
BioLogic
Duo-Flow
- <user name> - <project name> - <method name> - <run name>
WL1 - 280nm
0.40
WL2 - 260nm
0.15
WL3 - 214nm
2.00
WL4 - 405nm
0.00
Flow Rate
EGP %B
0 %B
0.00 ml/min
0%
Split
1.00ml/min
0 %B
Gradient Pump: F-40
UV
Conductivity
438 psi
0.03775 AU
359 mS/cm
QuadTec
Econo Gradient
Pump
SIM1/pH
SIM1/SIG
0.953 Volt
0.00 pH
A
mS/cm
B
0.00
1
1
A
2
3
4
5
6
7
8
9
10
11
12
13 14
10.00
20.00
5.00
15.00
25.00
2
3
4
0.100
0.075
0.050
0.025
-0.000
Milliliters
Rack Pos:
Tube #:
MODES OF OPERATION
SYSTEM OPERATION
7-38