Bio-Rad BioLogic Signal Import Module (SIM) - Manual (Page 37)

• System Cable 25, RS232. To connect to the Instrument Control Module (ICM). If a Maximizer is in
use, connect to its COM1 port instead of the ICM.
• Power cord
An optional 2 mm PEEK flow cell (2.2 µl flow cell volume, 18 µl including flow cell inlet and outlet tubes) is
available for flow rates up to 80 ml/min including 10-32 long Fingertight fittings (quantity 4).
Figure 2-8. QuadTec UV/Vis Detector
For a complete discussion of the QuadTec detector, refer to its separate documentation.
3
0
Link
Load
Prog
Hold 0
Run 1
Time
(min)
1
(nm)
2
(nm)
Edit Prog
Clear O
Events:
2 off 0 on /
Signal 1
[ au ]
Signal 2
[ au ]
Vie w
Setup
GLP
AU TO
ZER
O
SCAN
1
2
3
4
5 6
7
8
9
0
SLIDES
FLOW CELL
FLOW PATH PORT
FLOW PATH PORT
NUMERIC KEYS
ARROW KEYS
AUTO ZERO KEY
SCAN KEY
DESCRIPTION OF BIOLOGIC DUOFLOW SYSTEM SYSTEM OVERVIEW
2-24