Bio-Rad BioLogic Signal Import Module (SIM) - Manual (Page 30)

Table 2-9. (continued)
Maximizer Screens
Function and Description
pH Calibration (continued)
CURSOR moves the cursor to the next digit of the pH set point.
UP/DOWN arrows adjust the pH set point.
CANCEL aborts the calibration.
ENTER accepts the pH value of the first calibration buffer and moves to
the next screen.
Display of the current pH voltage for monitoring probe equilibration.
SET or ENTER sets the first calibration point.
CANCEL aborts the calibration.
CURSOR moves the cursor to the next digit of the pH set point.
UP/DOWN arrows adjust the pH set point.
CANCEL aborts the calibration.
ENTER accepts the pH value of the second calibration buffer and moves
to the next screen.
Displays the current pH voltage for monitoring probe equilibration.
SET or ENTER sets the second calibration point and exits pH calibration
mode.
CANCEL aborts the calibration.
Conductivity Calibration
Displays the current conductivity reading (mS/cm).
ENTER causes the Maximizer to enter calibration mode.
CURSOR moves the cursor to the next digit of the calibration constant.
ENTER accepts the conductivity cell constant, calibrates the conductivity
meter, and exits calibration mode.
CANCEL aborts the calibration.
Beeper
ENTER causes the Maximizer to enter volume adjustment mode.
The UP and DOWN arrows adjust the volume of the alarm.
Firmware Version
Displays the current version of the Maximizer firmware.
DESCRIPTION OF BIOLOGIC DUOFLOW SYSTEM SYSTEM OVERVIEW
2-17
Screen
MAXIMIZER V3.xx
NEXT
VOLUME: UP/DOWN
ENTER TO FINISH
BEEPER?
PREV ENTER=Y
NEXT
NEW CELL C:
CURSOR 43.00
CANCEL
SET CELL C?
PREV ENT=Y
NEXT
COND.
PREV 0.86
NEXT
2ND:
CANCEL 35.22 mV
SET
2ND pH PT.
CURSOR _7.00
CANCEL
1ST:
CANCEL 35.22 mV
SET
1ST pH PT.
CURSOR _4.00
CANCEL