BECKHOFF AX5000 S-IDN Parameters - Manual (Page 137)

S­IDNs
S­0­0204 Motor shut down temperature
If the temperature of the motor exceeds this value, the drive sets error bit 2 of S­0­0011, and an error is
generated. FD07 "Motor overtemperature shutdown" is issued as the corresponding error code.
Attributes
Name Value
Format udec
Data length 16
Decimal point 1
Min value 0.0
Max value 150.0
Default value 100
Unit °C
Changeable in EtherCAT state PreOp
Cyclic transfer No
Device parameter No
Related to interface revision No
Note
IDNs involved
S‐0‐0011 [ } 12]
AX5000 ­ IDN­Descriptions 137 Version 3.1