BECKHOFF AX5000 S-IDN Parameters - Manual (Page 60)

S­IDNs
S­x­0082 Positive torque limit value
The parameter limits the set torque/force value of the drive. It defines the positive upper limit. If this limit is
exceeded, the drive sets bit 3 of S­0­0013. The base for the percentage figure is P­0­0092.
Attributes
Name Value
Format udec
Data length 16
Decimal point 1
Min value 0.0
Max value 100.0
Default value 100.0
Unit %
Changeable in EtherCAT state PreOp, SafeOp, Op
Cyclic transfer MDT
Device parameter No
Related to interface revision No
Note
Parameter set switchover is possible!
This IDN exists as S­0­0082; S­1­0082; S­2­0082; S­3­0082;
S­4­0082; S­5­0082; S­6­0082, and S­7­0082. Ex factory, all values are identical.
Note
IDNs involved
S‐0‐0086 [ } 66], S‐0‐0013 [ } 16]
Note
Additional functional description
AX5000 / parameter set switchover
AX5000 ­ IDN­Descriptions 60 Version 3.1