BECKHOFF AX5000 S-IDN Parameters - Manual (Page 50)

S­IDNs
S­0­0047 Position command value
The parameter contains the position command value. In position­controlled modes, this parameter is used to
cyclically transfer the position command values from the controller to the servo drive. The cycle time is
specified in S­0­0001.
Attributes
Name Value
Format dec
Data length 32
Decimal point 0
Min value ­2 147 483 648
Max value 2 147 483 647
Default value ­
Unit inc
Changeable in EtherCAT state No
Cyclic transfer MDT
Device parameter No
Related to interface revision No
Note
IDNs involved
S‐0‐0001 [ } 9], S‐0‐0048 [ } 51], S‐0‐0076 [ } 55], S‐0‐0079 [ } 57], S‐0‐0134 [ } 106]
AX5000 ­ IDN­Descriptions 50 Version 3.1