BECKHOFF AX5000 S-IDN Parameters - Manual (Page 170)

S­IDNs
S­0­0384 Amplifier temperature
The parameter contains the amplifier temperature (actual value). If the warning threshold (S­0­0200) is
exceeded, bit 2 is set by S­0­0012 (C2D). If the error threshold (S­0­0203) is exceeded, the drive is shut
down with an error (C1D).
Attributes
Name Value
Format udec
Data length 16
Decimal point 1
Min value ­
Max value ­
Default value ­
Unit °C
Changeable in EtherCAT state No
Cyclic transfer AT
Device parameter No
Related to interface revision No
Note
IDNs involved
S‐0‐0011 [ } 12], S‐0‐0012 [ } 14], S‐0‐0200 [ } 136], S‐0‐0203 [ } 136]
Also see about this
2 S­0­0200 Amplifier warning temperature [ } 134]
AX5000 ­ IDN­Descriptions 170 Version 3.1