Boonton 4500B Peak Power Meter - Manual (Page 145)

Boonton 4500B RF Peak Power Analyzer
Operation 4-73
Table 4-21. Util > Remote Conf > GPIB > Setup > Submenu (continued)
Menu Item Function
(Type) Selections (SCPI CMD)
Select ―EOI only‖ whenever possible. If necessary for compatibility
with older equipment, use ‖LF‖, ―CR‖ or ―CRLF‖ as required.
SYSTem:COMMunicate:GPIB:TALK {EOIONLY, CRLF, CR, LF}
EOI on Talk
On, Off Select ―Off‖ only when a special terminating character(s) without EOI
(Toggle) is required. Used only for compatibility with legacy and mixed vintage
GPIB equipment.