Boonton 4500B Peak Power Meter - Manual (Page 41)

Boonton 4500B RF Peak Power Analyzer
Getting Started 3-7
Table 3-1 Operating Controls, Indicators and Connections (continued)
Ref. No.
Front Rear Nomenclature
Function
11 * Trigger input BNC connector for Channel 1 and (optional) Channel 2 trigger
signals.
12
Data entry keypad for parameter input and selections to the instrument. Includes
keys to specify units and to clear display errors. (PC kbd equivalents: <ENT>,
0 – 9, ‗.‘ , ‗-', m, u, n, G, M, K)
13
* Measurement channel multipin sensor connector for Channel 1 and (optional)
Channel 2. For connecting BOONTON peak power sensors ONLY!
14 ON-STBY switch. In STBY (Standby) mode, amber LED is on and internal 1
GHz calibrator remains powered (not operable) to enhance accuracy and
stability; other modules are off. In ON mode, green LED is on and all modules
are powered and operable. From ON mode, press once to go to Standby. To
force the Standby condition, hold down for at least 3 seconds.
Figure 3-2. Model 4500B - Rear Panel
(Shown without optional rear panel connectors)