Boonton 4500B Peak Power Meter - Manual (Page 307)

Boonton 4500B RF Peak Power Analyzer
Remote Operation 5-107
Table 5-1. SCPI COMMAND SUMMARY (continued)
SYSTem:COMMunicate:GPIB:LISTen Set/return LISTENER line termination. <arg> = EOIONLY, CR, LF
SYSTem:COMMunicate:GPIB:TALK
Set/return TALKER line termination. <arg> = EOIONLY, CRLF, CR,
LF
SYSTem:DATE:DAY
Set/get day. <arg> = 1 to 31
SYSTem:DATE:MONTH
Set/get month. <arg> = 1 to 12
SYSTem:DATE:WEEKday?
Get day of week
SYSTem:DATE:YEAR
Set/get year. <arg> = 2005 to 2038
SYSTem:ERRor
Return system error code and description
SYSTem:ERRor:NEXT
Return system error code and description
SYSTem:ERRor:CODE
Return system error code
SYSTem:LANGuage
Set/return language selection. <arg> = SCPI, EMUL4500A
SYSTem:PRESet
Set instrument to default conditions.
SYSTem:TIMe:HOUR
Set/get hour. <arg> = 0 to 23
SYSTem:TIMe:MINUTE
Set/get minute. <arg> = 0 to 60
SYSTem:VERSion?
Return SCPI version compliance
TRACe[1|2|3|4|5|6|7]:AVERage:DATA[:NEXT]?
Return count average power samples starting at index
TRACe[1|2|3|4|5|6|7]:COUNt
Set/return total number of trace pwr points to return.<arg> = 1 to 501
TRACe:DELImiter Set/return the trace delimiter. <arg> = COMMA, CR, LF, SPACE
TRACe[1|2|3|4|5|6|7]:INDEX
Set/return index of the next trace power point. <arg> = 0 to 500
TRACe[1|2|3|4|6|7]:MAXimum:DATA[:NEXT]?
Return count maximum power samples starting at index
TRACe[1|2|3|4|6|7]:MINimum:DATA[:NEXT]?
Return count minimum power samples starting at index
TRACe:SEND
Send trace data to file
TRACe:SOURce
Set/return the trace source <arg>= CH1, CH2, TRIG1, TRIG2, CHM,
MEM1, MEM2, CAL1,CAL2, HIST1,HIST2
TRIGger:BTRIGger:ECOUNT
Set B trigger event count. <arg> = 0 to 999999
TRIGger:BTRIGger:LEVel
Set B trigger level. <arg> = -39.99 to 20.00