Boonton 4500B Peak Power Meter - Manual (Page 205)

Boonton 4500B RF Peak Power Analyzer
Remote Operation 5-5
The Operation Status Register is read by the STATus:OPERation:CONDition? command. The transition masks are set by the
STATus:OPERation:NTransition and STATus:OPERation:PTransition commands. The bit enable mask is set by the
STATus:OPERation:ENABle command and read by the STATus:OPERation:ENABle? query. The Operation Event Register
is read by the STATus:OPERation:EVENt? query.
The Questionable Event Status Register has the same structure as the Operation Status Register. Refer to the command
descriptions that follow for detailed information.
5.5 SCPI COMMAND REFERENCE.
This section contains a list of all SCPI remote commands accepted by the 4500B. The list is grouped by SCPI or IEEE488.2
function, and includes a detailed description of each command.
Command Group Section
IEEE-488.2 Commands 5.5.1
CALCulate Subsystem 5.5.2
CALibration Subsystem 5.5.3
DISPlay Subsystem 5.5.4
FETCh Queries 5.5.5
HCOPy Commands 5.5.6
INITiate and ABORt Commands 5.5.7
MARKer Subsystem 5.5.8
MEASure Queries 5.5.9
MEMory Subsystem 5.5.10
OUTPut Subsystem 5.5.11
READ Queries 5.5.12
REFline Subsystem 5.5.13
SENSe Subsystem 5.5.14
STATus Subsystem 5.5.15
SYSTem Subsystem 5.5.16
TRACe Data Array Commands 5.5.17
TRIGger Subsystem 5.5.18