Boonton 4500B Peak Power Meter - Manual (Page 167)

Boonton 4500B RF Peak Power Analyzer
Operation 4-95
Table 4-41. Prgm > WFM Store > Menu (continued)
Menu Item Function
(Type) Selections (SCPI cmd)
Store
MENU Opens the filename submenu
(Submenu)
Press the Prgm > WFM Store > Store menu key to open a menu that
allows you to change the filename of a waveform storage file. The
default filename is made up of the basename entered above plus a
sequential number. You can use the default filename or change part or
all of it.
See MMEMory:STORe in Chapter 5.
NOTE
A filename extension that identifies the type of waveform saved is supplied by the system. This extension
should not be changed by the user. An error will occur on recall if the extension is not correct.
Figure 4-57. Prgm > WFM > Recall REPORT.