Display:channel: middle: left, Display:channel: middle:middle, Display:channel: middle:right – Boonton 4500B Peak Power Meter User Manual
Page 222: Display:channel:top:left, Display:channel: middle: left -22, Display:channel: middle:middle -22, Display:channel: middle:right -22, Display:channel:top:left -22, Boonton 4500b rf peak power analyzer, Remote operation
Boonton 4500B RF Peak Power Analyzer
Remote Operation
5-22
DISPlay:CHANnel: MIDdle: LEFT
Description:
Set or return the channel for the auto-measure or fixed parameter displayed in the Middle row,
Left
column
of
the
nine
element
parameter
field
above
the
trace
box.
DISPlay:PARAmeter:MODE must be set to MEAS.
Syntax:
DISPlay:CHANnel: MIDdle:LEFT <asc>
Argument:
<asc> = {CH1, CH2, TRIG1, TRIG2, CHM, MEM1, MEM2}
Valid Modes:
Pulse Mode only. Note: Modulated mode does not display Status and Measurement parameters.
Statistical mode displays a fixed combination of status and auto-measure parameters.
DISPlay:CHANnel: MIDdle:MIDdle
Description:
Set or return the channel for the auto-measure or fixed parameter displayed in the Middle row,
Middle
column
of
the
nine
element
parameter
field
above
the
trace
box.
DISPlay:PARAmeter:MODE must be set to MEAS.
Syntax:
DISPlay:CHANnel: MIDdle: MIDdle <asc>
Argument:
<asc> = {CH1, CH2, TRIG1, TRIG2, CHM, MEM1, MEM2}
Valid Modes:
Pulse Mode only. Note: Modulated mode does not display Status and Measurement parameters.
Statistical mode displays a fixed combination of status and auto-measure parameters.
DISPlay:CHANnel: MIDdle:RIGHt
Description:
Set or return the channel for the auto-measure or fixed parameter displayed in the Middle row,
Right
column
of
the
nine
element
parameter
field
above
the
trace
box.
DISPlay:PARAmeter:MODE must be set to MEAS.
Syntax:
DISPlay:CHANnel: MIDdle: RIGHt <asc>
Argument:
<asc> = {CH1, CH2, TRIG1, TRIG2, CHM, MEM1, MEM2}
Valid Modes:
Pulse Mode only. Note: Modulated mode does not display Status and Measurement parameters.
Statistical mode displays a fixed combination of status and auto-measure parameters.
DISPlay:CHANnel:TOP:LEFT
Description:
Set or return the channel for the auto-measure or fixed parameter displayed in the Top row, Left
column of the nine element parameter field above the trace box. DISPlay:PARAmeter:MODE
must be set to MEAS.
Syntax:
DISPlay:CHANnel:TOP:LEFT <asc>
Argument:
<asc> = {CH1, CH2, TRIG1, TRIG2, CHM, MEM1, MEM2}
Valid Modes:
Pulse Mode only. Note: Modulated mode does not display Status and Measurement parameters.
Statistical mode displays a fixed combination of status and auto-measure parameters.