Boonton 4500B Peak Power Meter - Manual (Page 235)

Boonton 4500B RF Peak Power Analyzer
Remote Operation 5-35
FETCh:ARRay:MARKer:POWer?
Description: Returns an array of the current marker measurements for the specified channel. The array consists
of the average, maximum, and minimum power and peak-to-average ratio between the two
markers, powers at both markers, and the ratio of the two markers. Note the peak-to-average ratio
and marker ratio are returned in dB for log units, and percent for linear units.
Syntax: FETCh[1|2|3|4|6|7]:ARRay:MARKer:POWer?
Returns: CC1, Pavg, CC2, Pmax, CC3, Pmin, CC4, PkToAvgRatio, CC5, Pwr@Marker1, CC6,
Pwr@Marker2, CC7, Mrk1/Mrk2 ratio
Where the CCn‘s are the measurement condition codes for each measurement..
Valid Modes: Pulse and Modulated modes
FETCh:ARRay:MARKer:WINDow?
Description: Return the current marker window display contents, MK1, MK2 and marker math result. The
channel assignment(s), marker math function and basic units are the same as the display.
Syntax: FETCh:ARRay:MARKer:WINDow?
Returns: CC, MK1, MK2 and marker math display
Where CC is the measurement condition code.
Valid Modes: All
FETCh:ARRay:TEMPerature:AVERage?
Description:
Return the averaged internal temperature of the Channel 1 and Channel 2 peak power sensors.
Note: If a non-temperature compensated peak sensor is in use, the 4500B displays a warning
message if the temperature has drifted more than 4C from the autocal temperature.
Syntax: FETCh:ARRay:TEMPerature:AVERage?
Returns: CC1, Sensor1 Average Temp in degrees C, CC2, Sensor2 Average Temp in degrees C
Where CC1 and CC2 are the measurement condition codes.
Valid Modes: All