Display:skew:reference, Display:statistical:mode, Display:statistical:presentation – Boonton 4500B Peak Power Meter User Manual
Page 230: Display:statistical:preview, Display:trace:mkcenter, Display:skew:reference -30, Display:statistical:mode -30, Display:statistical:presentation -30, Display:statistical:preview -30, Display:trace:mkcenter -30
Boonton 4500B RF Peak Power Analyzer
Remote Operation
5-30
DISPlay:SKEW:REFerence
Description:
Set or return the reference channel for time skew measurements between channels.
Syntax:
DISPlay:SKEW[1|2|3|4|6|7]:REFerence <asc>
Argument:
<asc> = {CH1 CH2, TRIG1, TRIG2, MEM1, MEM2}
Valid Mode:
Pulse
DISPlay:STATistical:MODE
Description:
Set or return the statistical sub-mode selection.
Syntax:
DISPlay:STATistical:MODE <asc>
Argument:
<asc> = {CCDF, CDF, PDF}
Valid Mode:
Statistical
DISPlay:STATistical:PRESentation
Description:
Set or return the horizontal scale type for statistical modes.
Syntax:
DISPlay:PRESentation <asc>
Argument:
<asc> = {LIN, LOG}
Valid Modes:
Statistical
DISPlay:STATistical:PREView
Description:
Set or return the state of the statistical split-screen preview display.
Syntax:
DISPlay:STATistical:PREView <asc>
Argument:
<asc> = {ON, OFF}
Valid Mode:
Gated Statistical
DISPlay:TRACe:MKCENTer
Description:
Changes the vertical center (logarithmic units) or the vertical offset (linear units) to the value at
which the active marker intersects the trace. The trace does not have to be visible on the display.
Syntax:
DISPlay:TRACe[1|2]:MKCENTer
Argument:
none
Valid Modes:
All except Statistical PDF