Boonton 4500B Peak Power Meter - Manual (Page 162)

Boonton 4500B RF Peak Power Analyzer
Operation 4-90
Table 4-36. Prgm > Inst Store > Menu
Menu Item
(Type) Selections Function
Folder
UP Select next higher level folder
(Action)
Folder
OPEN Open the selected folder
(Action)
Use any of the data entry controls to move the
selection cursor up and down the list of files,
and select a particular file.
Basename
UsrImg Opens the filename basename submenu
(Submenu)
Press the Prgm > Inst Store > Basename
menu key to open a menu that allows you to
change the basename of instrument
configuration storage files. The default
basename is UsrImg. This can be followed
by a number that indicates the stored
sequence, e.g. UsrImg001.dat,
UsrImg002.dat, UsrImg003.dat, etc. The
instrument will then index the file sequence
number automatically. A user defined
basename may be used instead
(None)
DELETE Deletes the selected file.
(Action)
User confirmation is requested before a file is
deleted.
Fig. 4-50. Prgm > Inst
Store MENU Opens the filename submenu Store menu.
(Submenu)
Press the Prgm > Inst Store menu key to open a menu that allows you
to change the filename of an instrument configuration storage file. The
default filename is made up of the basename entered above plus the
next sequential number. You can use the default filename or change
part or all of it.
NOTE
A filename extension that identifies the type of waveform saved is supplied by the system. This extension
should not be changed by the user. An error will occur on recall if the extension is not correct.