Boonton 4500B Peak Power Meter - Manual (Page 177)

Boonton 4500B RF Peak Power Analyzer
Operation 4-105
Table 4-48. Display > Format > Trace Type (2 of 2 ) > Submenu
Menu Item Function
(Type) Selections (SCPI cmd)
2 of 2
- more - Opens 1 of 2 menu section
(Action)
Mem 1
Lines, Points, Off Sets channel trace drawing method
(Mult. Choice) See discussion above, Sect 4-18.
Mem 2
Lines, Points, Off Sets channel trace drawing method
(Mult. Choice) See discussion above, Sect 4-18.
DISPlay:TRACe[1/2/3/4/5/6/7]:TYPE {POINTS, LINES, OFF}
Set Colors
You may color the various elements of the display for photographic purposes, or for any other reason.
Color choices can be solid Red, Green, Blue, or mixtures of these. Set the color for a display element by
selecting it in the Disp > Format > Set Color > Item Color window and adjust the mix of Red, Green and
Blue. See Table 4-48. The intersection of traces will be appear in the color of the active intersecting
channel, followed by the most recently active intersecting channel, etc.
Color selections are stored in non-volatile memory and are retained when the instrument is turned off. They
are not reset by operation of the INIT function key and are not included in the Prgm > Instrument >
―Store‖ and ―Recall‖ parameters. (See Subsection 4-17.) Reloading the Model 4500B control software or
selecting Disp > Format > Set Color > Init Colors will reinitialize the color selections to the factory
default settings.