Boonton 4500b rf peak power analyzer, Remote operation – Boonton 4500B Peak Power Meter User Manual
Page 305
Boonton 4500B RF Peak Power Analyzer
Remote Operation
5-105
Table 5-1. SCPI COMMAND SUMMARY (continued)
READ[1|2|3|4|5|6|7]:MARKer:RATio?
Return ratio between MK2 and MK1.
READ[1|2|3|4|5|6|7]:MARKer:RDELTa?
Return difference between MK1 and MK2.
READ[1|2|3|4|5|6|7]:MARKer:RRATio?
Return ratio between MK1 and MK2.
REFLine:ASSIgn
Set ref lines 1 & 2 to specified channel. <arg> = OFF, ACTIVE,
CH1, CH2, TRIG1, TRIG2, CHM, MEM1, MEM2
REFLine[1|2]:POSItion:LEVel
Set/return horizontal reference line level. <arg> = -99.00 to 99.00
REFLine:POSItion:FORCetomk
Set reference line to current marker positions
REFLine:TRACk
Set/return reference line tracking. <arg> = OFF, X1X2,
TOPBOT, DISTMESIAL, DISTPROX
SENSe[1|2|3|4]:AVERage
Set/return trace averaging count. <arg> = 1 to 16384
SENSe[1|2|3|4]:BANDwidth
Set/return sensor video bandwidth. <arg> = LOW, HIGH
SENSe[1|2]:CALTAB:COUNt
Set/return number of cal table values to return as data. <arg> = 1
to 16384
SENSe[1|2]:CALTAB:DATA[:NEXT]?
Return count values from cal table, starting at index
SENSe[1|2]:CALTAB:INDEX
Set/return index of first cal table values to return as data. <arg> =
0 to 16383
SENSe[1|2]:CORRection:CALFactor
Set correction factor in dB. <arg> = -3.00 to 3.00
SENSe[1|2]:CORRection:FDOFfset
Set/return current frequency dependent offset table. <arg> = OFF,
TBLA, TBLB
SENSe[1|2]:CORRection:FREQuency
Set channel frequency. <arg> = 0.001e9 to 40e9
SENSe:CORRection:FRQTRK
Set/return frequency tracking. <arg> = ON or OFF
SENSe[1|2]:CORRection:OFFSet
Set/return sensor offset value in dB. <arg> = -99.99 to 99.99
SENSe[1|2]:CORRection:TEMPcomp
Set/return temperature compensation. <arg> = ON, OFF
SENSe[1|2]:FILTer:STATe
Set/return filter state. <arg> = OFF, AUTO, ON
SENSe[1|2]:FILTer:TIMe
Set/return filter time. <arg> = 0.002 to 16.00 s in steps of 0.002
SENSe[1|2]:HISTogram:COUNt
Set/return number of histogram bins to return as data. <arg> = 1
to 16384
SENSe[1|2]:HISTogram:DATA[:NEXT]?
Return count values from signal histogram, starting at index
SENSe[1|2]:HISTogram:INDEX
Set/return index of first bin to return as data. <arg> = 0 to 16383