System:communicate:serial:bits, System:communicate:serial:ctrl:rts, System:communicate:serial:parity – Boonton 4500B Peak Power Meter User Manual
Page 282: System:communicate:serial:sbits, System:communicate:serial:xon, System:communicate:serial:bits -82, System:communicate:serial:ctrl:rts -82, System:communicate:serial:parity -82, System:communicate:serial:sbits -82, System:communicate:serial:xon -82
Boonton 4500B RF Peak Power Analyzer
Remote Operation
5-82
SYSTem:COMMunicate:SERial:BITS
Description:
Set or return the number of serial bits per byte.
Syntax:
SYSTem:COMMunicate:SERial:BITS <n>
Argument:
<n> = 7, 8
Valid Modes:
Any
SYSTem:COMMunicate:SERial:CTRL:RTS
Description:
Set or return the serial handshake control mode.
Syntax:
SYSTem:COMMunicate:SERial:CTRL:RTS <asc>
Argument:
<asc> = NONE, RTS, CTS, RTS&CTS
Valid Modes:
Any
SYSTem:COMMunicate:SERial:PARity
Description:
Set or return the condition for setting the serial parity bit.
Syntax:
SYSTem:COMMunicate:SERial:PARity <asc>
Argument:
<asc> = NONE, ODD, EVEN
Valid Modes:
Any
SYSTem:COMMunicate:SERial:SBITs
Description:
Set or return the number of serial stop bits per byte.
Syntax:
SYSTem:COMMunicate:SERial:SBITs <n>
Argument:
<n> = 1, 2
Valid Modes:
Any
SYSTem:COMMunicate:SERial:XON
Description:
Set or return the state of character based handshake control for the serial port.
Syntax:
SYSTem:COMMunicate:SERial:XON <asc>
Argument:
<asc> = OFF, ON
Valid Modes:
Any