Reset switch port counter, Syntax, Parameter – Allied Telesis AT-S63 User Manual
Page 124: Description, Example
Advertising
Chapter 8: Port Statistics Commands
124
RESET SWITCH PORT COUNTER
Syntax
reset switch port=
port
counter
Parameter
port
Specifies the port whose statistics counters you want to
return to zero. You can specify more than one port at a
time. You can specify the ports individually (for
example, 5,7,22), as a range (for example, 18-23), or
both (for example, 1,5,14-22).
Description
This command returns a port’s statistics counters to zero.
Example
The following command returns the counters on ports 14 and 15 to zero:
reset switch port=14-15 counter
Advertising