Allied Telesis AT-S63 - Manual (Page 508)

Chapter 34: Public Key Infrastructure (PKI) Certificate Commands
508
CREATE PKI CERTIFICATE
Syntax
create pki certificate= name keypair= key-id
serialnumber= value [format=der|pem]
subject=" distinguished-name "
Parameters
certificate Specifies a name for the self-signed certificate. The
name can be from one to eight alphanumeric
characters. Spaces are allowed; if included, the name
must be enclosed in double quotes. The
management software automatically adds the “.cer”
extension.
keypair Specifies the ID of the key pair that you want to use to
create the certificate.
serialnumber Specifies the serial number for the certificate. The
range is 0 to 2147483647. The default is 0.
format Specifies the type of encoding the certificate will use.
The options are:
der Specifies binary format which cannot
be displayed. This is the default.
pem Specifies an ASCII-encoded format
that allows the certificate to be
displayed once it is generated.
subject Specifies the distinguished name for the certificate.
The name must be enclosed in quotes.
Description
This command creates a self-signed certificate. You can use the certificate
to add encryption to your web browser management sessions of the
switch. A new self-signed certificate is automatically stored in the switch’s
file system.
Before you can create a self-signed certificate, you must create an
encryption key pair. The certificate will contain the public key of the key
pair. To create a key pair, refer to “CREATE PKI CERTIFICATE” on
page 508.
After you have created a new self-signed certificate, you need to load it
into the certificate database. The switch cannot use the certificate for