Set user password, Syntax, Parameter – Allied Telesis AT-S63 User Manual
Page 57: Description, Example
AT-S63 Management Software Command Line Interface User’s Guide
57
SET USER PASSWORD
Syntax
set user manager|operator password=
password
Parameter
password
Specifies the password.
Description
This command sets the manager or operator’s password. The default
manager password is “friend.” The default operator password is “operator.”
The password can be from 0 to 16 alphanumeric characters. Allied
Telesyn recommends that you avoid special characters, such as spaces,
asterisks, or exclamation points because some web browsers do not
accept them in passwords. The password is case sensitive.
SET USER MANAGER PASSWORD is equivalent to “SET PASSWORD
MANAGER” on page 51. SET USER OPERATOR PASSWORD is
equivalent to “SET PASSWORD OPERATOR” on page 52.
Example
The following command sets the operator’s password:
set user operator password=newby