Show portaccess|portauth port, Syntax, Parameters – Allied Telesis AT-S63 User Manual
Page 475: Description, Examples
AT-S63 Management Software Command Line Interface User’s Guide
475
SHOW PORTACCESS|PORTAUTH PORT
Syntax
show portaccess|portauth port=
port
authenticator|supplicant
config|status
Note
The PORTACCESS and PORTAUTH keywords are equivalent.
Parameters
port
Specifies the port whose port-based access control
settings you want to view. You can specify more than
one port at a time.
authenticator
Indicates that the port is an authenticator.
supplicant
Indicates that the port is a supplicant.
config
Displays the port-based access control settings for
the port.
status
Displays the status and role of the port.
Description
Use this command to display information about authenticator and
supplicant ports.
Examples
The following displays the status for port 10, which has been set to the
authenticator role:
show portaccess port=10 authenticator status
This command displays the port access configuration of port 12 which is a
supplicant port:
show portaccess port=12 supplicant config