Destroy classifier, Syntax, Parameters – Allied Telesis AT-S63 User Manual
Page 213: Description, Example
AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features
213
DESTROY CLASSIFIER
Syntax
destroy classifier=
idnumber
Parameters
classifier
Specifies the ID number of the classifier to be deleted. The
number can be from 1 to 9999. You can delete more than
one classifier at a time. You can specify the classifiers
individually (e.g., 2,5,7) as a range (e.g., 11-14), or both
(e.g., 2,4-8,12).
Description
This command deletes a classifier from the switch. To delete a classifier,
you need to know its ID number. To display the ID numbers of the
classifiers, refer to “SHOW CLASSIFIER” on page 218.
You cannot delete a classifier if it belongs to an ACL or QoS policy that
has already been assigned to a port. You must first remove the port
assignments from the ACL or policy before you can delete the classifier.
Example
This command deletes classifiers 2 and 4:
destroy classifier=2,4