Destroy qos trafficclass, Syntax, Parameter – Allied Telesis AT-S63 User Manual
Page 262: Description, Examples
Advertising
Chapter 18: Quality of Service (QoS) Commands
262
Section I: Basic Features
DESTROY QOS TRAFFICCLASS
Syntax
destroy qos trafficclass=
value
Parameter
trafficclass
Specifies the ID number of the traffic class you want to
delete. You can delete more than one traffic class at a time.
You can specify the flow groups individually, as a range, or
both.
Description
This command deletes traffic classes.
Examples
This command deletes traffic class 22:
destroy qos trafficclass=22
This command deletes traffic classes 16 to 20 and 23:
destroy qos trafficclass=16-20,23
Advertising