Set password operator, Syntax, Parameters – Allied Telesis AT-S63 User Manual
Page 52: Description, Example
Advertising
Chapter 3: Basic Switch Commands
52
SET PASSWORD OPERATOR
Syntax
set password operator
Parameters
None.
Description
This command sets the operator’s password. Logging in as operator
allows you to only view the switch parameters. The default password is
“operator.” The password can be from 0 to 16 alphanumeric characters.
Allied Telesyn recommends that you avoid special characters, such as
spaces, asterisks, or exclamation points because some web browsers do
not accept them in passwords. The password is case sensitive.
Example
The following command changes the operator’s password:
set password operator
Follow the prompts to enter the new password.
Advertising