Disable log, Syntax, Parameters – Allied Telesis AT-S63 User Manual
Page 191: Description, Examples
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
191
DISABLE LOG
Syntax
disable log
Parameters
None.
Description
This command disables the event log module.
Note
The event log, even when disabled, still logs all AT-S63 initialization
events that occur when the switch is reset or power cycled. Any
switch events that occur after AT-S63 initialization are recorded only
if the event log is enabled.
Examples
The following command disables the event log on the switch:
disable log
Advertising