Show garp, Syntax, Parameter – Allied Telesis AT-S63 User Manual
Page 436: Description, Example
Advertising
Chapter 27: GARP VLAN Registration Protocol Commands
436
SHOW GARP
Syntax
show garp=gvrp
Parameter
garp
Specifies the GARP application you want to display.
The only GARP application supported by AT-S63
management software is GVRP.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays current values for the following GARP application
parameters:
GARP application protocol
GVRP status
GVRP GIP status
GVRP Join Time
GVRP Leave Time
GVRP Leaveall Time
Port information
Mode
Example
The following command displays GVRP information:
show garp=gvrp
Advertising