Purge http server, Syntax, Parameters – Allied Telesis AT-S63 User Manual
Page 490: Description, Example
Advertising
Chapter 32: Web Server Commands
490
PURGE HTTP SERVER
Syntax
purge http server
Parameters
None.
Description
This command resets the HTTP server to its default values. Refer to
Appendix A, “AT-S63 Default Settings” in the AT-S63 Management
Software Menus Interface User’s Guide or in the AT-S63 Management
Software Web Browser Interface User’s Guide. To view the current web
server settings, refer to “SHOW HTTP SERVER” on page 496.
Example
The following command resets the web server parameters to their default
values:
purge http server
Advertising