Allied Telesis AT-S63 - Manual (Page 34)

Chapter 3: Basic Switch Commands
34
DISABLE IP REMOTEASSIGN
Syntax
disable ip remoteassign
Parameters
None.
Description
This command deactivates the DHCP and BOOTP client software on the
switch. This command is equivalent to “DISABLE DHCPBOOTP” on
page 33. The default setting for the client software is disabled.
To activate the DHCP and BOOTP client software, refer to “ENABLE
BOOTP” on page 36 or “ENABLE IP REMOTEASSIGN” on page 38.
Example
The following command deactivates the DHCP and BOOTP client
software:
disable ip remoteassign