Allied Telesis AT-S63 - Manual (Page 304)

Chapter 22: SNMPv3 Commands
304
parameter.
Description
This command clears the specified fields in an SNMPv3 Access Table
entry.
Examples
The following command clears the readview parameter in a security group
called “Engineering” which has a security model of the SNMPv3 protocol
and a security level of privacy.
clear snmpv3 access=Engineering securitymodel=v3
securitylevel=privacy readview
The following command clears the values in the readview, writeview, and
notifyview parameters in a security group called “SystemTest.” This group
has a security model of the SNMPv3 protocol and a security level of
authentication.
clear snmpv3 access=SystemTest securitymodel=v3
securitylevel=authentication readview writeview notifyview