Chapter 9, Static port trunking commands – Allied Telesis AT-S63 User Manual
Page 127
Advertising
127
Chapter 9
Static Port Trunking Commands
This chapter contains the following commands:
“ADD SWITCH TRUNK” on page 128
“CREATE SWITCH TRUNK” on page 129
“DELETE SWITCH TRUNK” on page 131
“DESTROY SWITCH TRUNK” on page 132
“SET SWITCH TRUNK” on page 133
“SHOW SWITCH TRUNK” on page 134
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information and guidelines on static port trunking,
refer to Chapter 7, “Static and LACP Port Trunks” in the AT-S63
Management Software Menus Interface User’s Guide.
Advertising