Show log status, Syntax, Parameter – Allied Telesis AT-S63 User Manual
Page 207: Description, Example
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
207
SHOW LOG STATUS
Syntax
show log status
Parameter
None.
Description
This command displays information about the event log feature. Following
is an example of what is displayed with this command:
Event Log Configuration:
Event Logging .................... Enabled
Number of Output Definitions ..... 2
The Event Logging field indicates whether the feature is enabled or
disabled. The Number of Output Definitions states the number of output
definitions that currently exist.
Example
The following command displays event log status information:
show log status
Advertising