Examples – Allied Telesis AT-S63 User Manual
Page 351
AT-S63 Management Software Command Line Interface User’s Guide
351
Examples
The following command modifies a User Table entry called “atiuser104”.
The authentication protocol is set to the MD5 protocol and the
authentication password is “atlanta45denver.” The DES privacy protocol is
on and the privacy password is “denvertoatlanta3.”
set snmpv3 user=atiuser104 authentication=md5
authpassword=atlanta45denver privpassword=denvertoatlanta3
The following command modifies a User Table entry called “atiuser104.”
The authentication protocol is set to the MD5 protocol and the
authentication password is “nycbostonwash56.” The privacy protocol is on
and the privacy password is “bostontoamherst7.” The storage type is set to
nonvolatile storage.
set snmpv3 user=atiuser104 authentication=md5
authpassword=nycbostonwash56 privpassword=bostontoamherst7
storagetype=nonvolatile