Show sntp, Syntax, Parameters – Allied Telesis AT-S63 User Manual
Page 92: Description, Example
Advertising
Chapter 5: Simple Network Time Protocol (SNTP) Commands
92
SHOW SNTP
Syntax
show sntp
Parameters
None.
Description
This command displays the following information:
Status of the SNTP client software
SNTP server IP address
UTC Offset
Daylight Savings Time (DST) - enabled or disabled
Poll interval
Last Delta - The last adjustment that had to be applied to the system
time. It is the drift in the system clock between two successive queries
to the SNTP server.
Example
The following command displays SNTP client software information:
show sntp
Advertising