Show qos trafficclass, Syntax, Parameter – Allied Telesis AT-S63 User Manual
Page 277: Description, Examples
Advertising
AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features
277
SHOW QOS TRAFFICCLASS
Syntax
show qos trafficclass[=
idnumber
]
Parameter
trafficclass
Specifies the ID of the traffic class you want to view. You
can specify more than one traffic class at a time. Separate
multiple traffic classes with commas (e.g., 4,5,10).
Description
This command displays the traffic classes on a switch.
Examples
This command displays all of the traffic classes:
show qos trafficclass
This command displays traffic class 14:
show qos trafficclass=14
Advertising