Allied Telesis AT-S63 - Manual (Page 33)

AT-S63 Management Software Command Line Interface User’s Guide
33
DISABLE DHCPBOOTP
Syntax
disable dhcpbootp
Parameters
None.
Description
This command deactivates the DHCP and BOOTP client software on the
switch. This command is equivalent to “DISABLE IP REMOTEASSIGN” on
page 34. The default setting for the client software is disabled.
To activate the DHCP and BOOTP client software, refer to “ENABLE
BOOTP” on page 36 or “ENABLE IP REMOTEASSIGN” on page 38.
Example
The following command deactivates the DHCP and BOOTP client
software:
disable dhcpbootp