Allied Telesis AT-S63 - Manual (Page 507)

AT-S63 Management Software Command Line Interface User’s Guide
507
database should be given a unique name.
The LOCATION parameter specifies the filename of the certificate as
stored in the switch’s file system. When specifying the filename, be sure to
include the file extension “.cer”.
The TRUSTED parameter specifies whether the certificate is from a
trusted CA. The default is TRUE. Only self-signed root CA certificates are
typically set to be automatically trusted, and only after the user has
checked the certificate’s fingerprint and other details using “SHOW PKI
CERTIFICATE” on page 520.
The TYPE parameter specifies what type of certificate is being added. Self
signed certificates should be assigned a type of SELF. If CA is specified,
the switch tags this certificate as a CA certificate. If ENDENTITY or EE is
specified, the switch tags the certificate to indicate that it belongs to an end
entity. The default is ENDENTITY.
Note
The TRUSTED and TYPE parameters have no affect on the
operation of a certificate. You can select any permitted value for
either parameter, or you can omit the parameters. The parameters
are included only as placeholders for information in the certificate
database.
Example
The following command loads the certificate “sw12.cer” from the file
system into the certificate database. The certificate is assigned the name
“Switch 12 certificate”:
add pki certificate="Switch 12 certificate"
location="sw12.cer" type=self