Allied Telesis AT-S63 - Manual (Page 139)

AT-S63 Management Software Command Line Interface User’s Guide
139
DELETE LACP PORT
Syntax
delete lacp port= port aggregator= name adminkey= key
Parameters
port Specifies the port to be deleted from the aggregator.
You can delete more than one port at a time. You can
specify the ports individually (for example, 5,7,22), as a
range (for example, 18-20), or both (for example, 1,14-
16).
aggregator Specifies the name of the aggregator.
adminkey Specifies the ID for the aggregator, a hexadecimal
number between 0x1 and 0xffff.
Description
This command removes ports from an aggregator. If you do not specify the
aggregator name, the ports are removed from the aggregator to which
they were associated, and their association with the default aggregator is
restored. To completely remove an aggregator, see “DESTROY LACP
AGGREGATOR” on page 140.
Example
The following command removes port 9 from an aggregator named
AGG_5:
delete lacp port=9 aggregator=agg_5