Show switch agingtimer|ageingtimer, Syntax, Parameters – Allied Telesis AT-S63 User Manual
Page 483: Description, Example
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
483
SHOW SWITCH AGINGTIMER|AGEINGTIMER
Syntax
show switch agingtimer|ageingtimer
Parameters
None.
Description
This command displays the current setting for the aging timer. The switch
uses the aging timer to delete inactive dynamic MAC addresses from the
MAC address table. To set the aging timer, refer to “SET SWITCH
AGINGTIMER|AGEINGTIMER” on page 482.
Example
The following command displays the current setting for the MAC address
aging timer:
show switch agingtimer
Advertising