Allied Telesis AT-S63 - Manual (Page 411)

411
Chapter 26
VLANs and Multiple VLAN Mode
Commands
This chapter contains the following commands:
ˆ “ADD VLAN” on page 412
ˆ “CREATE VLAN” on page 415
ˆ “DELETE VLAN” on page 418
ˆ “DESTROY VLAN” on page 421
ˆ “SET SWITCH INFILTERING” on page 422
ˆ “SET SWITCH MANAGEMENTVLAN” on page 423
ˆ “SET SWITCH VLANMODE” on page 424
ˆ “SET VLAN” on page 426
ˆ “SHOW VLAN” on page 427
Note
Remember to use the SAVE CONFIGURATION command to save
your changes on the switch.
Note
For background information on tagged and port-based VLANs,
multiple VLAN modes, and ingress filtering, refer to Chapter 23,
“Port-based and Tagged VLANs” in the AT-S63 Management
Software Menus Interface User’s Guide. For information about
multiple VLANs, refer to Chapter 25, “Multiple VLANs” in the AT-S63
Management Software Menus Interface User’s Guide.