Enable mgmtacl, Syntax, Parameters – Allied Telesis AT-S63 User Manual
Page 551: Description, Example
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
551
ENABLE MGMTACL
Syntax
enable mgmtacl
Parameters
None
Description
This command enables the management ACL and performs the same
function as the SETMGMTALL STATE=DISABLE command.
Note
Activating the Management ACL without entering any access control
entries (ACEs) prohibits you from remotely managing the switch
from a Telnet or web browser management session.
Example
The following command enables the management ACL:
enable mgmtacl
Advertising