Allied Telesis AT-S63 - Manual (Page 474)

Chapter 30: 802.1x Port-based Network Access Control Commands
474
SHOW PORTACCESS|PORTAUTH
Syntax
show portaccess|portauth config|status
Note
The PORTACCESS and PORTAUTH keywords are equivalent.
Parameters
config Displays whether port-based access control is
enabled or disabled on the switch.
status Displays the role and status of each port.
Description
Use this command to display operating information for port-based access
control.
The CONFIG parameter displays:
ˆ Enabled or disabled status of port-based access control
ˆ Authentication method
The STATUS parameter displays the following information for each port:
ˆ Port role
ˆ Status
Examples
The following command displays whether port-based access control is
enabled or disabled on the switch:
show portaccess config
The following command displays the role and status for each port:
show portaccess status